published date : oct 14 ,2010 drawing no : xdsb5305 v1 checked : b.l.liu p.1/5 3.0x2.5mm surface mount led lamp part number: xzmdkcBD57W part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. xzmdkcBD57W red algainp water clear 100 198 650 blue ingan 40 79 468 120 absolute maximum ratings (t a =25c ) mdk (algainp) cbd (ingan) unit reverse voltage v r 5 5 v forward current i f 30 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 185 150 ma power dissipation p d 75 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 features z 3.0mmx2.5mm smt led, 1.1mm thickness. z bi-color, low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivit y level : level 3. z rohs compliant. mdk (algainp) unit forward voltage (typ.) (if=20ma) vf 1.95 v forward voltage (max.) (if=20ma) vf 2.5 v reverse current (max.) (vr=5v) ir 10 ua wavelength of peak emission (typ.) (if=20ma) p 650 nm wavelength of dominant emission (typ.) (if=20ma) d 630 nm spectral line full width at half-maximum (typ.) (if=20ma) ? 28 nm capacitance (typ.) (vf=0v, f=1mhz) c 35 pf operating characteristics (t a =25c ) cbd (ingan) 3.3 4.0 50 468 470 25 100 cbd attention observe precautions for handling electrostatic discharge sensitive devices notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjec t to change without notice.
published date : oct 14 ,2010 drawing no : xdsb5305 v1 checked : b.l.liu p.2/5 3.0x2.5mm surface mount led lamp part number: xzmdkcBD57W ? mdk
published date : oct 14 ,2010 drawing no : xdsb5305 v1 checked : b.l.liu p.3/5 3.0x2.5mm surface mount led lamp part number: xzmdkcBD57W ? cbd
published date : oct 14 ,2010 drawing no : xdsb5305 v1 checked : b.l.liu p.4/5 3.0x2.5mm surface mount led lamp part number: xzmdkcBD57W ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? the device has a single mounting surface. the device must be mounted according to the specifications. reflow soldering is recommended and th e soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product.
published date : oct 14 ,2010 drawing no : xdsb5305 v1 checked : b.l.liu p.5/5 3.0x2.5mm surface mount led lamp part number: xzmdkcBD57W packing & label specifications xzmdkcBD57W
|